aac husby (XLS) - Fichier XLS

Fichier partagé
aac husby (XLS)

Aperçu texte

Sheet1
cam part # price $ USD 2009 in lift real Iift spec ?at valve? No lash? in dur real in dur spec ? ex lift real ex lift spec ? ex dur real ex dur spec ? in open in close ex open ex close Lobe CL lobe cl in lobe cl ex
0.01               110.0  
53.0               112.0  
55.0 590.36.010.000 137.0 8.59 9.84 214.0 233.0 8.38 9.61 210.0 240.0 10.0 54.0     
HC 3014-1  190.0  9.95  247.0  9.55  240.0      111.0 115.5
ktm 8-06 590.36.010.100 144.0 9.19 10.72 237.0 313.0 8.97 10.57 234.0 318.0       
berg 08 820.36.010.000 160.0 10.6 10.85 266.0  10.6 10.85 266.0  19.0 67.1 68.8 17.9 115.0  
HC 3015-1  190.0 10.3 10.8 263.0 271.0 9.7 10.2 255.0 261.0 18.0 65.0   113/111 113.0 111.0
ktm 8-33 590.36.110.000 135.0 9.17 10.82 258.0 296.0 8.81 10.3 230.0 298.0       
ktm 8-07 SMS.36.010.000 240.0 9.45 10.84 258.0 309.0 8.99 10.2 250.0 309.0 24.0 61.0 55.0 22.0 108.5/106.5 108.5 106.5
G-1                 
G-2    10.75  269.0  10.16  262.0       
G-3    10.5  274.0  10.5  274.0       
G-4                 
G-5                 
WC berg1 24-001 grind 792 regrinds 126  10.03  272.0  10.03  272.0 26.0 60.0 60.0 26.0 107.0  
WC berg2 24-011 grind 600 regrinds 126  10.52  284.0  10.52  284.0 33.0 65.0 65.0 33.0 106.0  
WC KTM1 62-052 Grind:612/637 new cams 300  9.83  288.0  9.83  282.0       
WC KTM2 62-042 grind 673/291 new cams 300  9.96  296.0  9.83  287.0       
WC KTM3 62-032 Grind:821 new cams 300  10.41  309.0  10.41  309.0       
WC KTM4 62-062 Grind:820/821 new cams 300  10.95  321.0  10.41  309.0       
MC lx1 570-X1 300 regrind  10.51  284.0  10.51  284.0 36.0 68.0 68.0 36.0 106.0  
MC lx2 570-x2 300 regrind  10.34  272.0  10.16  272.0 29.0 63.0 63.0 29.0 107.0  
MC 3 570x3 300 regrind  9.88  267.0  9.72  254.0 28.0 59.0 53.0 21.0   
mc stock stock cam spec   9.78  253.0  9.78  253.0 18.0 54.0 54.0 18.0 108.0 105.5 106.0
 Not adds or specs but measured by DJH   in engine with 3 dial indicators & degree wheel with valve lash set                
 806 has .416" lift & 318 degrees duration on exh  .422" lift & 313 degress on intake                
 833 has .406" lift & 298 degrees duration on exh  .426" lift & 296 degress on intake                
 My thought  the 806 is the better of the two  and I agree its not too radicle for a big motor like yours                
Sheet2
Sheet3
aac husby (XLS) - Fichier XLS

aac husby (XLS)

Aperçu texte

Sur le même sujet

Partager le fichier

Lien court

Code HTML

Code BB

Lien permanent
